Micropac MD-6 Two Speed Hydraulic Hand Pump in 316/1.4404 Stainless Steel. Multi fluid pumps and hydrostatic pressure test sets to 1000 bar.

Durable and compact Two Speed Hydraulic Hand Pumps in 316 stainless steel for both everyday use and in harsh environments where corrosion is a challenge. These pumps offer high displacement at the low pressure stage then an easy switch to small displacement, high pressure operation via our no-nonsense manual changeover. Typical applications include actuation, pressure testing, charging and filling. Displacements up to 45 cc per stroke on the low pressure stage and pressures up to 1000 bar on the high pressure stage are available. Retrofit in place of some other industry standard 89mm units. True multi fluid capability. Easy and cost effective fitting of alternative seals for a very wide range of fluids. The standard unit has wide compatibility including oil, water and glycols.

Learn more about two speed hand pumps in general and operating basics in our Application Note “how do I select the right two speed hydraulic hand pump”.

Also watch our MD series two speed hand pump in action on our You tube channel

Why buy a Micropac MD-6 Two Speed Hydraulic Hand Pump in 316/1.4404 Stainless Steel?

  • Stainless steel and bronze units outperform industry alloy and steel pumps in many applications. Very cost effective.
  • Enhanced corrosion resistance whether for use in the factory or in extreme environments.
  • Micropac proven parts as used worldwide for over 40 years.
  • Three models for optimum application. 450, 700 and 1000 bar high pressure capability.
  • Available as a pump or as a lightweight hydrostatic pressure test set.
  • Universal fluid compatibility by design – oil, water, glycols, ‘skydrol’ aerospace media and more.
  • Dependable, controllable and safe manual changeover between LP and HP pressure stages.
  • Retrofit available for industry legacy 89 mm square alloy units. Easy refit.
  • Anodised alloy and stainless OEM options available. Contact the factory.
  • Common mounting interface with MW units so use any Micropac reservoir.
  • Forms a low cost hydraulic pump for your specialist pressure test rig, test stand or test bench
  • ATEX / IECEx version available for hazardous areas

Description

A range of rugged Micropac Two Speed Hydraulic Hand Pumps for universal hydraulic, hydrostatic and pressure test applications. The Micropac MD series Two Speed Hydraulic Hand Pump offers a wide range of options to meet your specific requirement. High quality British engineering provides long service life and easy overhaul with service kits being readily available from us, the manufacturer. Manual hydraulic power up to 450, 700 or 1000 bar on three models with true multi-fluid capability. Three different displacements/pressure ranges are provided on the three models.

The Micropac MD-6 Two Speed Stainless Steel Hand Pump offers a corrosion resistant manual hydraulic solution for use in harsh environments.

Options include a pressure hold/release valve, a relief valve and a quality 63mm all stainless steel pressure gauge. Poppet and soft seat check valves offer optimum pressure holding.

Pump units can be mounted on fixed or portable reservoirs. These units are supplied assembled, tested and ready to use.

Contact us if you need any help in selecting a unit for your application or for more details about anodised alloy and stainless pumps for OEM’s.

Technical Specifications

Pressure: 1 – 1000 bar over three models
Stroke volume: MD-6-45 450 bar 45cc/4,7cc, MD-6-70 700 bar 45cc/3.8cc

or MD-6-10 1000 bar 32cc/2.6cc

Materials:   316/1.4404 stainless steel external. Small amounts of 302/303/304/420/431 and bronze CW307G in addition wetted
Seal options:   Nitrile, optional fluorocarbon ‘Viton’ or EPDM for “Skydrol”
Fluid options:  Mineral oil, water, glycols, ‘skydrol’and multiple fluids.
Options available:  Special seals and anodised alloy OEM units.

Downloads

Request 2D Drawings/ 3D Models

Ways to Order